Some disadvantages to GP-QUICK have been encountered. For example, GP-QUICK accesses the population at random. This can cause severe performance problems if part of the population is swapped out of main memory.
Over the course of this work numerous changes have been made to GP-QUICK. The following list contains some of the more important:
All the experiments were carried out on the UCL Computer Science department's heterogeneous network of SUN workstations. The runs being independent of each other. Using the queue problem as an example, with a population of 10,000, each job occupies about 13 Megabytes of RAM within the workstation. However the elapse time of each job varies considerably depending upon the load on the workstation (most runs were done out of hours), the speed of the workstation and the details of the GP run. To perform a million fitness evaluations (each of which requires the program under test to be run 320 times) takes all day on the faster workstations and cannot be completed in a day on the slower ones.
This section briefly describes an implementation which has achieved reductions in run time by a factor of two. It can be applied to multi-tree programs whose primitives have side effects and is implemented using a conventional representation for the population. (Section 2.4.1 describes DAG based caches which can be used where there are no side-effects).
When tests are independent of each other, unless a particular test causes code which is different in a child from its parent to be run, the child's result on that test must be the same as that of its parent on the same test. Since the only difference between the child's code and the parent's is produced by crossover (or mutation), it can be readily determined if the child's result on a particular test could be different from its parent. Only those tests where the result could be different need be run. For the others, the result can be taken from the parent. The complete fitness of the child is assembled from the individual test results. NB result values can be inherited indefinitely, i.e. not only directly from the child's mother but also from its grandmother, great grandmother etc.
Our implementation considers changes only at the tree level. If crossover changes a tree which is not executed in a particular test then the new program's behaviour on that test must be identical to its parent's. I.e. its score must be identical and therefore the child's score on that test is inherited, and that test is not executed. The savings produced are dependent upon the test sequences, GP parameters and other time saving techniques (cf. Section D.6), nonetheless run time was halved in some cases. Since results for each test in the test case must be stored, as well as the overall fitness value, the technique increases execution speed at the expense of greater use of memory.
The technique could be extended to cover other cases where a child's score must be identical to that of one of its parents. For example children produced by crossovers which occur within introns, must behave identically to their parent and so have identical fitness.
Handley's  combination of caches and directed acyclic graphs, requires all the primitives to be free of side effects. read, write and other primitives do have side effects, nevertheless caching can be used when parts of the program (such as trees or ADFs) are known to be free of side effects. In the case of some runs of the list problem, cache hit ratios of between 70% and 97% were obtained with caches on End (1000 words), First (200), Next (1000) and Previous (200). This reduced run time by about 50%.
As mentioned in Section D.4, GP runs may take a long time. Under these circumstances a check point file can be used to restart a run from the last check point, rather than from the beginning. The check point file can also be used to extend particularly interesting runs.
The bulk of the check point file is occupied by the GP population. If written as plain text the population consumes too much disk space, particularly if more than one GP run is active at the same time. Therefore the population is written in a coded form, which occupies one byte per program primitive. As the GP run continues and the population converges, considerable reductions in disk space can be achieved by using gzip to compress the check point file. Compression ratios as high as 25 fold can occur but compression to about one bit per program primitive is common. (The high compression achieved indicates low diversity within the GP population). A balance needs to be struck between the time taken to process the check point file and the potential time saved should the check point file be used. Typically it takes about a minute to compress the check point file. Therefore check points are written about once an hour.
A number of CPU and memory usage measurements were made using the MAX problem [Langdon,1997] running on a 400 MHz Digital Alphastation 500/400 with a 2MB cache and a SUN SPARCstation 2 fitted with an 80MHz CPU Weitek PowerUP CPU and floating point processor giving a performance of about 1.6 times that of a standard SPARCstation 2.
GP-QUICK uses fixed length objects to store the population. The memory required for each GP individual is one byte times the maximum allowed program length plus a fixed overhead. The overhead is 182 bytes on the SUN and 304 bytes on the Alpha. To estimate the total memory, the number of bytes per GP individual is multiplied by the size of the population (and doubled if using a generational GA). With small populations, the memory occupied by the code can also be important.
A number of trials on both machines were made using the MAX problem. In this problem the population will be dominated by + and 0.5 primitives, as both of these require only trivial floating point calculations we expect the run time to be dominated by the time to interpret the GP programs and so Table D.2 gives an indication of the performance of GP-QUICK on the two machines. The top two rows of figures are obtained by dividing the total time by the number of individuals or primitives evaluated.
GP-QUICK supports a FASTEVAL pre-processing step which is aimed as increasing performance when GP individuals are evaluated multiple times. In the MAX problem individuals are only evaluated once so a modest saving might have been made by removing the FASTEVAL step.
An estimate of program evaluation time was made by evaluating individuals multiple times. The bottom two rows of Table D.2 were obtained by dividing the increase in total time by the increase in number of individuals and primitives evaluated. The lower two rows can be used to estimate the extra runtime caused by multiple evaluations, e.g. due to multiple fitness cases.
Due to the cache structures on the two machines individuals can be re-evaluated very quickly, leading to very fast times in the lower part of Table D.2. On problems with large numbers of (or complex) functions or terminals the cache may not perform as well and longer run times are expected.
Most of the source code used in the experiments described in this book is available on an as is unsupported basis, for research and educational purposes, via anonymous ftp node ftp.cs.bham.ac.uk in subdirectories of pub/authors/W.B.Langdon/